|

Simulation of a stationary jet flow of gases with different densities in a cocurrent air flow

Authors: Golodnov D.A., Sokurenko E.D., Komarov R.A.
Published in issue: #2(55)/2021
DOI: 10.18698/2541-8009-2021-2-671


Category: Power, Metallurgic and Chemical Engineering | Chapter: Nuclear power plant

Keywords: hydrogen safety, stationary jet flow of gases with different densities, standard linear k–ε turbulence model, Simcenter STAR-CCM+ software package, mathematical model, injection of gas jets into the channel through a nozzle
Published: 17.02.2021

The authors carried out a simulation of the flow of gases with different densities in the Simcenter STAR-CCM+ software package. The objects of study are jets of helium, carbon dioxide and air, injected into the cocurrent flow of air moving in the channel through an axisymmetric nozzle. A mathematical model based on the averaged Reynolds equations for a mixture of incompressible gases closed by a standard linear k – ε-model is described, the results of calculating the fields of average velocities are presented. The calculation method was validated according to the data of physical experiments published in the open press.


References

[1] Kirillov I.A., Kharitonova N.L., Sharafutdinov R.B., et al. Hydrogen safety for nuclear power plants with light water reactor units. Current state of the problem. Yadernaya i radiatsionnaya bezopasnost’ [Nuclear and Radiation Safety Journal], 2017, no. 2(84), pp. 26–37 (in Russ.).

[2] Molkov V. Hydrogen safety research: state-of-the-art. Proc. 5th Int. Sem. on Fire and Explosion Hazards, 2003, art. 28e43.

[3] Solonin V.I., Markov P.V. Hydrodynamics of a mixing grid-intensifier, developing a convective transfer for pressurized water reactors. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [BMSTU Journal of Mechanical Engineering], 2011, no. 3, pp. 18–25. DOI: http://dx.doi.org/10.18698/0536-1044-2011-3-18-25 (in Russ.).

[4] Markov P.V., Solonin V.I. Influence of spacer type on fluid dynamics of 7-rod fuel assembly. Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 2013, no. 1, pp. 38–48 (in Russ.).

[5] Getya S.I., Krapivtsev V.G., Markov P.V., et al. Modeling temperature nonuniformities in a fuel-element bundle of a VVER-1000 fuel-assembly. Atomnaya energiya, 2013, vol. 114, no. 1, pp. 55–57. (in Russ.). (Eng. version: At. Energy, 2013, vol. 114, no. 1, pp. 69–72. DOI: https://doi.org/10.1007/s10512-013-9673-3)

[6] Amielh M., Djeridane T., Anselmet F., et al. Velocity near-filed of variable density turbulent jets. Int. J. Heat Mass Transf., 1996, vol. 39, no. 10, pp. 2149–2164. DOI: https://doi.org/10.1016/0017-9310(95)00294-4

[7] Circular air jet. cfd.mace.manchester.ac.uk: website. URL: http://cfd.mace.manchester.ac.uk/ercoftac/doku.php?id=cases:case038 (accessed: 22.11.2020).

[8] Vargaftik N.B. Spravochnik po teplofizicheskim svoystvam gazov i zhidkostey [Handbook on thermal physical properties of gases and liquids]. Moscow, Nauka Publ., 1972 (in Russ.).

[9] STAR-CCM+. User guide. Version 2019.3.1. Siemens, 2020.

[10] Belov I.A., Isaev S.A. Modelirovanie turbulentnykh techeniy [Simulation of turbulent flows]. Sankt-Petersburg, BGTU Publ., 2001 (in Russ.).