|

Increasing the back-to-back endurance of the cog wheels made of steel 25Х13Н2

Authors: Ivanov I.M., Shebeshev K.I.
Published in issue: #5(22)/2018
DOI: 10.18698/2541-8009-2018-5-303


Category: Metallurgy and Science of Materials | Chapter: Metal Science, Thermal Processing of Metals and Alloys

Keywords: cog wheels, steel 25Х13Н2, heat treatment procedure, back-to-back endurance, hardness, hardening, high-frequency current hardening, drawing
Published: 27.04.2018

The article considers a technological procedure of the cog wheels workpieces heat treatment. It investigates the initial and finishing heat treatment of the cog wheel including the heating temperature determination, the holding time and the medium used for treatment. Based on the experiment data we have elicited the regularities by means of which the performance characteristics of the cog wheels with strict requirements for corrosion resistance can be defined. The article presents a technical regime of the finishing heat treatment consisting of two stages: 1) toughening; 2) deep drawing hardening with high-frequency current. We determine the required values of heating temperature, the holding time and the parameters of the medium used for treatment.


References

[1] Voznesenskaya N.M., Kablov E.N., Petrakov A.F. high-tensile noncorrosive steel of austenite-to-martensite group. Metallovedenie i termicheskaya obrabotka metallov, 2002, no. 7, pp. 34–37.

[2] Pakhomova S.A. Special aspects of teaching “Surface engineering” discipline to the students of “material engineering and material technology” course. Inzhenernyy vestnik [Engineering Bulletin], 2015, no. 9, URL: http://engsi.ru/doc/812901.html.

[3] Novikov I.I. Teoriya termicheskoy obrabotki metallov [Theory of metals thermal treatment]. Moscow, Metallurgiya publ., 1978. 392 p.

[4] Ul’yanin E.A. Korrozionnye stali i splavy [Corrosion steels and alloys]. Moscow, Metallurgiya publ., 1991, 256 p.

[5] Fakhurtdinov R.S., Pakhomova S.A., Ryzhova M.Yu. On the problems of modernizing equipment for vacuum carburization. Problemy mashinostroeniya i nadezhnosti mashin, 2017, no. 2, pp. 113–118. (Eng. version: Journal of Machinery Manufacture and Reliability, 2017, vol. 46, no. 2, pp. 187–192.)

[6] Fakhurtdinov R.S., Ryzhova M.Y., Pakhomova S.A. Advantages and commercial application problems of vacuum carburization. Polymer Science. Series D, 2017, vol. 10, no. 1, pp. 79–83.

[7] Pomel’nikova A.S., Fetisov G.P., Pakhomova S.A. On problem of hardening of differently alloyed steels by treatment in corona discharge. Tekhnologiya metallov, 2017, no. 2, pp. 20–24.

[8] Alekseeva J.S., Fedorova L.V., Fedorov S.K., Kapustin I.N. Improving the quality of the surface layer of steel parts. Proc. 5th Int. Mechanical Engineering Forum (IMEF), 2012. Prague, Czech Republic, pp. 65–74.

[9] Fedorova L.V., Fedorov S.K., Bokhonov G.Yu. Strengthening electromechanical recondition of gearbox main-shaft for «Gazel» family automobiles ». Remont, vosstanovlenie, modernizatsiya [Repair, Reconditioning, Modernization], 2015, no. 9, pp. 14–16.

[10] Pakhomova S.A., Makushina M.A., Kovalenko S.V. Deformatsionnoe uprochnenie tyazhelonagruzhennykh poverkhnostey zubchatykh peredach dlya gornodobyvayushchey promyshlennosti [Deformation hardening of the heavily loaded gear surfaces for the mining industry]. Sovremennye innovatsionnye tekhnologii podgotovki inzhenernykh kadrov dlya gornoy promyshlennosti i transporta [Contemporary innovation technique of the engineering personnel training for the mining and transport industry], 2016, no. 3, pp. 243–251.

[11] Pakhomova S.A., Ryzhov N.M. Efficiency of the strain hardening of the rose steels. Vestnik MGTU im. N.E. Baumana. Ser. Mashinostroenie [Vestn. Mosk. Gos. Tekh. Univ. im. N.E. Baumana, Mashinostr. [Herald of the Bauman Moscow State Tech. Univ., Mechan. Eng.], 1999, no. 2, pp. 61–68.

[12] Zakalka metallov tokami vysokoy chastoty [Metal hardening high-frequency current]. URL: http://www.m-deer.ru/tehnologiya/zakalka-metallov-tokami-vysokoj-chastoty.html (accessed 17 February 2018).