|

Method for determining local properties of parts from spatially-reinforced composite materials

Authors: Shkaranova S.V.
Published in issue: #6(59)/2021
DOI: 10.18698/2541-8009-2021-6-705


Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment of Mechanical and Physical Processing

Keywords: composite materials, finite element method, strength theory, instrumental indentation method, Hertz problem, contact strength, effective elastic modulus, material fracture models, carbon-carbon composite material
Published: 24.06.2021

Currently, the creation and updating of non-destructive testing methods for composite materials are becoming more and more popular. In this paper, the method of instrumental indentation and the features of its application to composites are considered. A numerical calculation of the indentation process was carried out according to various strength criteria using the Ansys software package. Based on the data obtained, two groups of criteria were identified for the area of material destruction. In the future, this division will help to select the criteria for calculating the contact strength correctly and analyze the fracture of composite materials when using the method of instrumental indentation.


References

[1] GOST R 8.748-2011. Metally i splavy. Izmerenie tverdosti i drugikh kharakteristik materialov pri instrumental’nom indentirovanii. Chast’ 1. Metod ispytaniy [State standard GOST R 8.748-2011. State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method]. Moscow, Standartinform Publ., 2013 (in Russ.).

[2] GOST R 8.904-2015. Izmerenie tverdosti i drugikh kharakteristik materialov pri instrumental’nomindentirovanii. Chast’ 2. Poverka i kalibrovka tverdomerov [State standard GOST R 8.904-2015. State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 2. Verification and calibration of testing machines]. Moscow, Standartinform Publ., 2016 (in Russ.).

[3] Medvedskiy A.L., Kornev Yu.V., Kurbatov A.S. Research of physicomechanical properties 4D carbon-carbon of the composite material on macro and micro levels at action of heats. Trudy MAI, 2010, no. 41. URL: http://trudymai.ru/published.php?ID=23804 (in Russ.).

[4] Ogar P.M., Tarasov V.A., Dayneko A.A. On the issue of the elastic-plastic introduction of a spherical indenter. Sistemy. Metody. Tekhnologii [Systems. Methods. Technologies], 2011, vol. 10, no. 2, pp. 14–16 (in Russ.).

[5] Tarasov V.A., Fedorov I.B. Analysis of solid-state theory at indentation by a sphere. Mekhaniki XXI veku [Mechanical Engineers to XXI Century], 2015, no. 14, pp. 81–88 (in Russ.).

[6] Chikova O.A., Shishkina E.V., Konstantinov A.N. Measurement of Young’s modulus and hardness of Al–50 Wt % Sn alloy phases using nanoindentation. Phys. Metals Metallogr., 2013, vol. 114, no. 7, pp. 616–622. DOI: https://doi.org/10.1134/S0031918X1307003X

[7] Johnson K.L. Contact mechanics. Cambridge University Press, 1987. (Russ. ed.: Mekhanika kontaktnogo vzaimodeystviya. Moscow, Mir Publ., 1989.)

[8] Andreeva Yu.D. Metodika kontaktnogo nerazrushayushchego kontrolya kachestva uglerod-uglerodnogo kompozitsionnogo materiala (UUKM). Vypusk. kvalifikats. Rabota [Method of contact non-destructive quality control of carbon-carbon composite (UUKM). Graduation thesis]. Korolev, Tekhnologicheskiy universitet Publ., 2019 (in Russ.).

[9] Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic moduley using load and displacement sensing indentation experiments. J. Mater. Res., 1992, vol. 7, no. 6, pr. 1564–1583. DOI: https://doi.org/10.1557/JMR.1992.1564

[10] Goodier J.N., Timoshenko S.P. Theory of elasticity. McGraw-Hill, 1970. (Russ. ed.: Teoriya uprugosti. Moscow, Nauka Publ., 1979.)

[11] Potapova L.B. Mekhanika materialov pri slozhnom napryazhennom sostoyanii [Material mechanics at combined stress]. Moscow, Mashinostroenie-1 Publ., 2005 (in Russ.).

[12] Filin A.P. Prikladnaya mekhanika tverdogo deformiruemogo tela. T. 1 [Applied mechanics of deformable body. Vol. 1]. Moscow, Nauka Publ., 1975 (in Russ.).

[13] Pisarenko G.S., Lebedev A.A. Deformirovanie i prochnost’ materialov pri slozhnom napryazhennom sostoyanii [Deformation and strength of materials at combined stress]. Kiev, Naukova dumka Publ., 1976 (in Russ.).

[14] Batanova O.A., Matvienko Yu.G. Crack initiation in edge chipping and indentation of brittle materials. Fizicheskaya mezomekhanika, 2015, no. 18, pp. 22–36 (in Russ.).