|

Graphoanalytical method of defining the limiting ratio of drawing the workpieces from the tapered thickness blanks

Authors: Levina A.V., Storozhilov V.A., Fonarev D.A.
Published in issue: #4(21)/2018
DOI: 10.18698/2541-8009-2018-4-288


Category: Mechanical Engineering and Machine Science | Chapter: Forming Technologies and Equipment

Keywords: drawing, tapered thickness workpiece, logarithmic thickness distribution, limiting drawing ratio, radial stresses, the thickness of the disk-shaped blank edge, flange shift, matrix drawbead
Published: 06.04.2018

Following the solution of the equilibrium differential equation for the flange of the disk-shaped blank, the thickness of which changes by the law of the logarithmic n-power polynomial in the direction from the center to the edge, we obtained analytic dependences for estimating the limiting drawing ratio. Through these dependences we calculated the specific values of the limiting drawing ratios for two variations (n = 1, n = 2) of the logarithmic thickness distribution law, for which the maximum possible values are realized. The article compares the obtained marginal coefficient values with the values for the power-series distribution of the concave parabola kind and the linear law of thickness distribution. We analyze the impact of the flange shift on the peculiar features of the meridional stress distribution in it and show how to use these distributions for estimating the limiting drawing ratio with the arbitrary law of changing the thickness of the workpiece flange.


References

[1] Baburin M.A., Baskakov V.D., Gerasimov N.V., Zarubina O.V., Tarasov V.A. Matematicheskaya model’ rascheta predel’nogo koeffitsienta vytyazhki tsilindricheskikh detaley iz listovykh zagotovok peremennoy tolshchiny. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [Proceedings of Higher Educational Institutions. Маchine Building]. 2018, no. 4, pp. 10–18.

[2] Baburin M.A., Baskakov V.D., Tarasov V.A., Zarubina O.V. The evaluation of the maximum degree hood of cylindrical parts from the disk blanks with variable thickness. Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem [Forging and Stamping Production. Material Working by Pressure], 2015, no. 1, pp. 3–6.

[3] Kuznetsov A.F., Gorbunova Yu.D., Orlov G.A. The study of the wall thickness changing of thin-walled elliptical bottoms during stamping. Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem [Forging and Stamping Production. Material Working by Pressure], 2017, no. 3, pp. 19–23.

[4] Baburin M.A., Baskakov V.D., Zarubina O.V. Drawing of metalfluoraplastic sleeves from disk workpieces of variable thickness Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem [Forging and Stamping Production. Material Working by Pressure], 2015, no. 7, pp. 16–22.

[5] Baburin M.A., Baskakov V.D., Zarubina O.V., Ladov S.V., Nikol’skaya Ya.M., Fedorov S.V. Application of thickness-shaped billets to control wall thickness of shell parts die-stamped by lead. Tekhnologiya metallov [Technology of Metals], 2016, no. 11, pp. 2–8.

[6] Chumadin A.S. Teoriya i raschety protsessov listovoy shtampovki (dlya inzhenerov) [Theory and calculation of sheet-stamping process (for engineers)]. Moscow, 2014, Eksposervis VIP publ., 216 p.

[7] Baburin M.A., Baskakov V.D., Gerasimov N.V., Zarubina O.V., Tarasov V.A. Analysis of workpieces form changing at the drawing of hemispherical parts with the application of intermediate deformed media. Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem [Forging and Stamping Production. Material Working by Pressure], 2014, no. 7, pp. 21–24.

[8] Baburin M.A., Baskakov V.D., Zarubina O.V., Ladov S.V., Fedorov S.V., Nikol’skaya Ya.M. Sposob shtampovki-vytyazhki obolochechnykh listovykh detaley plastichnym metallom [Method of shell parts drawing of plastic metal]. Patent 2623510 RF. Appl. 04.04.2016.

[9] Sizov E.S., Baburin M.A., Sizova K.G. Shtamp dlya glubokoy vytyazhki [Die block for deep drawing]. Avtorskoe svidetel’stvo na izobretenie SU 1201024 A [Inventor’s certificate SU 1201024 A]. 30.12.1985.

[10] Baburin M.A., Baskakov V.D., Zarubina O.V., Vasil’yeva T.V. Sposob izgotovleniya listovykh profilirovannykh po tolshchine zagotovok dlya glubokoy vytyazhki [Method for production sheet thickness-graded workpieces for deep drawing]. Patent RUS 2595307 RF. Appl. 14.04.2015.